Anhydrous Hydrogen Fluoride is a high-purity fluoride product with 99.999% purity, classified as UN 1790 and Danger Category 8+6.1. It has strong corrosive and toxic properties and is widely used in glass etching, quartz purification, rust removal, metal oxide removal, rare metal purification, mining and drilling, semiconductor and electronics industries, fluorescent bulbs, and cleaning solutions. It should be handled with strict safety measures and stored in a tightly closed container in a well-ventilated place.
| Availability: | |
|---|---|
| Quantity: | |
Glass etching or processing (quartz purification), rust remover, removal of metal surface oxides and rare metal purification (mining and drilling operations), semiconductor and electronics industries, fluorescent bulbs and cleaning solutions
Do not breathe dust/fume/gas/mist/ vapours/spray. Do not get in eyes, on skin, or on clothing. Wash your whole body thoroughly after operation. Do not eat, drink or smoke when using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/ face protection. Avoid release into the environment.
IF SWALLOWED: Immediately call a POISON CENTER/doctor
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN:Wash with plenty of water.
IF ON SKIN (or hair):Take off immediately all contaminated clothing.Rinse skin with water/shower.
IF INHALED:Remove person to fresh air and keep comfortable for breathing.
IF IN EYES:Rinse cautiously with water for several minutes.Remove contact lenses ,if present and easy to do.Continue rinsing.
Immediately call a POISON CENTER/doctor.
Rinse mouth.
Take off immediately all contaminated clothing and wash it before reuse.Wash contaminated clothing before reuse.
Store in a well-ventilated place.Keep container tightly closed.
Store locked up.
Dispose of contents/container in accordance with local regulation.
Substance/Mixture: Substance
Ingredient(s):
Chemical Name | CAS No. | EC No. | Concentration |
hydrogen fluoride | 7664-39-3 | 231-634-8 | >60% |
Sulfuric acid | 7664-93-9 | 231-639-5 | 0.08 |
Fluorosilicic acid | 16961-83-4 | 241-034-8 | 0.05 |
Water | 7732-18-5 | 231-791-2 | ≤39 .87 |
First aid measures
Description of necessary first-aid measures
Inhalation: Remove the subject from the contaminated area as soon as possible.Transport subject lying down, with the head higher that the body,to a quiet ,uncontaminated and well ventilated location. Administer oxygen (2 .5%calcium gluconate if available ,can be oxygen nebulised with trained personnel)or cardiopulmonary resuscitation if necessary and as soon a possible. If patient is unconscious,give artificial respiration.
Note: Mouth to mouth resuscitation is not recommended. Keep warm (blanket).Seek medical advice in all cases.Take to a hospital.
Skin: Immediately bring the clothed subject under the shower.Remove contaminated shoes, socks and clothing; while washing the affected skin with running water for 5 minutes.
Double bag all contaminated clothing for disposal. Immediately apply calcium glu conate gel 2.5%and massage into the affected area using rubber gloves; continue to massage while repeatedly applying gel until 15 minutes after pain is relieved. Apply water longer (15 minutes) if calcium glu conate is not available.If finger/finger nails are touched,even if there is no pain, dip them in a bath of 5% calcium glu conate for 15 to 20 minutes. Keep warm (blanket), provide clean clothing. Consult a physician immediately in all cases of skin contact no matter how minor. Take to a hospital immediately.
Eye: Flush eyes with running water for 5 minutes,while keeping the eyelids wide open. Rinse the eyes with a calcium gluconate 1%solution in physiological serum (10 mlof calcium glu conate 10% in 90 ml of physiological serum) for 10 minutes.Continue a calcium gluconate drip into eyes …Then drop wise while transporting. If 1%calcium gluconate is not available continue flushing with water.In the case difficulty opening the eyelids, administer an analgesic eye wash. Do not use oily drops, ointment ,or HF skin burn treatments. Consult an ophthalmologist or eye specialist immediately in all cases. Take to a hospital immediately.
Ingestion: Consult a physician immediately in all cases.Take to a hospital.
It is used for glass etching, quartz purification, rust removal, metal oxide removal, rare metal purification, semiconductors, electronics, fluorescent bulbs, and cleaning solutions.
The main ingredient is hydrogen fluoride, with a concentration of over 60%.
Avoid inhalation and contact with skin, eyes, or clothing. Use only in well-ventilated areas and wear protective equipment.
Rinse immediately with water and remove contaminated clothing. If swallowed, inhaled, or exposed to eyes or skin, seek medical help immediately.
Store in a tightly closed container in a well-ventilated place. Keep locked up and dispose of according to local regulations.
content is empty!
